Mazda 3 Sedan 2020 Owner's Manual page 115

▼ Unlocking with Auxiliary Key
Only the driver's door can be unlocked
using the auxiliary key.
Refer to Keys on page 3-2.
Insert the auxiliary key while the
driver's door handle is pulled and turn
the key to the unlock side. Turn the
auxiliary key back to its original
position before removing it.
NOTE
If you attempt to open the driver's
door using an unauthorized auxiliary
key, the key cylinder will spin around
but the door will not unlock.
▼ Locking, Unlocking with Touch
Sensor, Door Handle (With the
advanced keyless function)
By touching the sensing area of the
touch sensor, various locking/
unlocking operations can be done
without taking the key out of a bag or
pocket.
There are two types of touch sensors
used for locking and unlocking, and
each sensor is built into the outer door
handle on the driver and front
passenger's doors.
1. Sensing area of door lock touch
sensor (Depression on outer side of
door handle)
Doors and Locks
2. Sensing area of door release touch
sensor (Inner side of door handle)
NOTE
When locking/unlocking with the

transmitter carried, securely touch
the sensing area of the touch sensor
as follows.
Locking
Unlocking
The system may not operate normally

under the following conditions.
You touch the sensing area of the

door lock touch sensor and the
sensing area of the door release
touch sensor at the same time.
You touch the sensing area of the

touch sensor while wearing gloves.
Foreign matter such as snow or dirt

is stuck on the sensing area of the
touch sensor.
Before Driving
3-13