Toshiba PA3897U-1CAS Camileo BW10 - S User Manual page 2

2
Regulatory Information
TOSHIBA declares that this product conforms to the following Standards:
CE compliance
This product is CE marked in accordance with the requirements of the applicable
EU Directives. Responsible for CE marking is Toshiba Europe GmbH,
Hammfelddamm 8, 41460 Neuss, Germany. A copy of the official Declaration of
Conformity can be obtained from following website:
http://epps.toshiba-teg.com.
Model number: CAMILEO
Working Environment
The Electromagnetic Compliance (EMC) of this product has been verified
typically for this product category for a so called Residential, Commercial &
Light Industry Environment. Any other working environment has not been
verified by Toshiba and the use of this product in these working environments is
maybe restricted or cannot be recommended. Possible consequences of the use of
this product in non verified working environments can be: Disturbances of other
products or of this product in the nearby surrounding area with temporarily
malfunction or data loss/corruption as result. Example of non verified working
environments and related advices: Industrial environment (e.g. where 3-phase
380V mains is being used mainly): Danger of disturbances of this product due to
possible strong electromagnetic fields especially near to big machinery or power
units.
Medical environment: The compliance to the Medical Product Directive has not
been verified by Toshiba, therefore this product cannot be used as a medical
product without further verification. The use in usual office environments e.g. in
hospitals should be no problem if there is no restriction by the responsible
administration.
Automotive environment: Please search the owner instructions of the related
vehicle for advices regarding the use of this product (category).
FCC Conditions
This equipment has been tested and found to comply with Part
15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
®
BW10