Saving One Frame From A Video Clip As A Still Image - Toshiba PA3897U-1CAS Camileo BW10 - S User Manual

40
Recording
Capturing a still photo while recording a video clip
3 To take a still photo of the desired image, press the Photo (
button.
A still image is captured.
NOTE
Video clip recording size setting
NOTE

Saving one frame from a video clip as a still image

1 Play back the video clip. Pause the playback at the point you
wish to take a still photo.
2 Press the Photo (
If the file size of a video clip is very large, and the video clip is
uploaded to a computer to be played back, the computer may not
play back the video fast enough to be viewed properly, making it
appear jerky. The video will always play back properly on the
camcorder screen or on a television.
NOTE
When the remaining video recording time is approximately fifty
seconds, it is no longer possible to capture a still image while
recording a video clip. The exact remaining recording time at which
this occurs differs depending on the subject and on the recording file
size, as well as on the video recording mode. If you intend to capture
a still image while recording a video, it is suggested that you take
note of the remaining video recording time.
Depending on the type of media card used, recording may end before
the indicated remaining time available.
During video clip playback, the sound of a motor is audible
❖
During recording, the sound of the optical zoom movement or
auto focus movement may be recorded. This is not a
malfunction.
If no audio is heard
❖
The audio is not heard when the video clip is played back in the
frame-by-frame, slow-motion, fast playback or reverse playback
mode.
Still image recording size
1920 x 1080 pixels
1280 x 720 pixels
640 x 480 pixels
) button.
)