Endura 3935AX6 Installation

RECESS EXTENSION
RISER INSTALLATION P/N 3935AX6, 3920AX6
Components
3 - 1/2" Sch 40 pipe
3 - 1/2" Sch 40 couplings
2 - L Shaped extension components
11 - 1 1/4" screws
Preparing the Endura Tank to Accommodate the Extension
Disengage the Quick Connect latches and remove the lid from the tank.
With a hammer and
1
disengage the dowel pin from the tank.
Using a pair of pliers, remove the
dowel pin. Repeat this procedure for all
of the pins housed in the tank.
e n d u r a
®
ENDURA GREASE INTERCEPTOR
a punch, Insert the tank into the excavated hole
2
and locate the pipe connections to the
desired height.
Equipment Required
Silicone Sealant Level
Hammer Screwdriver
Pliers Saw
Nail Punch Pencil
Level the tank into its final position and
3
secure to the piping.
®