Table of Contents
Advertisement
Quick Links
The H.E. Anderson Company is dedicated to assisting our customers with installation
and use of our products. Our technical staff are available each weekday from 8:30 AM
to 4:30 PM central time. You may call us toll free at 1-800-331-9620 from anywhere in
the U.S.A. and Canada. If no one is available, we will promptly return your call. You may
also contact us via e-mail at info@heanderson.com
Before you call, review this manual. You may find the answer to your question here.
But if not, reviewing the manual will help us to help you.
If you need an additional owners manual for any H.E. Anderson Company product,
please visit our website at
UNPACKING
Please open and inspect
your package upon receipt.
Your package was packed
with great care and all the
necessary packing materials
to arrive to you undamaged.
If you do find an item that is
broken or damaged, you
must contact the delivering
carrier to report the claim.
Installation Guidelines
and Operation of Anderson
®
Ratio:Feeder
GETTING TECHNICAL ASSISTANCE
http://heanderson.com/manuals.php
Series J Plus Injectors
Advertisement
Table of Contents
Related Manuals for H.E. Anderson Feeder J Plus
Summary of Contents for H.E. Anderson Feeder J Plus
- Page 1 Before you call, review this manual. You may find the answer to your question here. But if not, reviewing the manual will help us to help you. If you need an additional owners manual for any H.E. Anderson Company product, please visit our website at...
- Page 2 Plumbed using sch 40 PVC pipe operate by either air or water. (shown operating by air.) Piping layout may be altered to fit available space. Some PVC plumbing items are not supplied with unit. (See page 3) H.E. Anderson Co. IGHC-11-10...
- Page 3 PVC pipe. Optional floor stand. Piping layout may be altered to Anderson high performance (P/N 07541) fit available space. 8 gallon PVC blend tank w/2" socket fittings. Shaded items are not (P/N 07533) supplied with unit. IGHC-11-10 H.E. Anderson Co.
-
Page 4: Warnings And Cautions
WARNING! Connecting the flow smaller “day tanks”. This will eliminate the sensor incorrectly can damage chance of large quantities of chemicals the flow sensor electronics. draining into your watering system. H.E. Anderson Co. IGHC-11-10... -
Page 5: Location & Access
“pop” valve or an ● Provide safety equipment such as accumulator (captive air device) near your goggles, gloves, aprons, or anything injector. (See installation example, P. 3) common sense tells you you might need. IGHC-11-10 H.E. Anderson Co. -
Page 6: Water Quality
(7) Install a PVC Bushing & 1/2" NPT boiler drain for taking water samples. The manifold valve terminals are numbered on the 4-output terminal block. On the 2-output model, valve #1 is on the left side. H.E. Anderson Co. IGHC-11-10... -
Page 7: Operational Start-Up
DO NOT DISASSEMBLE ANY PART OF YOUR are properly primed. SYSTEM until you have determined the exact problem, and then do it carefully, according to instructions. Many small and easily corrected IGHC-11-10 H.E. Anderson Co. - Page 8 Operation smaller “day tanks”. This will eliminate the chance of large quantities of chemicals draining into your watering system. There are some conditions which must be met in order for your injection system to operate properly. H.E. Anderson Co. IGHC-11-10...
- Page 9 This warranty gives you specific legal rights and you may also have other legal rights which may vary from state to state. H.E. Anderson Company does not authorize any person to create for it any other obligation or liability in connection with these products. ANY IMPLIED WARRANTY APPLICABLE TO THESE PRODUCTS IS LIMITED TO THE DURATION OF THIS WARRANTY.
Need help?
Do you have a question about the Feeder J Plus and is the answer not in the manual?
Questions and answers