Directing The Display Output When You Turn On The Computer - Toshiba M9-S5513 User Manual

68
Getting Started
Using external display devices
3 Turn on the external device.
Your computer will automatically detect the external display
device and activate a screen with display options.
4 Select the settings you desire and click Apply.
5 Click OK.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display output
settings is to use the display hot key (
1 Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(only the first option is available when you do not have an
external monitor attached) (the last option is available only if
you are in Extended Display Mode):
(Sample Image) Display options window
Fn and F5 simultaneously.
LCD—Internal display only
LCD + CRT—Internal display and external monitor
simultaneously
CRT—External monitor only
LCD + CRT Multi Monitor—Internal display and external
monitor, with one acting as the primary display and the
other as an extended desktop
Swap—Switch primary display between internal display
and external monitor when using extended desktop
+
Fn
Fn , press F5 repeatedly until the setting
):
F5
F5