Table of Contents
Advertisement
72
Getting Started
Hard Drive Recovery Utilities
Recovering the original factory image
(recommended)
1
Press 1 on the keyboard to recover your hard disk drive to its
original factory setting.
A confirmation message displays, reminding you that all data
will be lost during the recovery process. Be sure you have
saved your work before proceeding.
2
Click Yes to begin the recovery process. Once complete,
a message displays that the HDD has been recovered.
3
Press any key on the keyboard to restart the computer.
Recovering the C: partition of the HDD only
To recover only your C: drive:
1
Press 2 on the keyboard when the TOSHIBA HDD Recovery
Utility screen displays.
❖
Recovering a hard disk drive to its factory default setting
deletes all partitions on the hard disk drive and your
information will be lost. Be sure to save your work first.
Recovering the C: drive to its factory default setting reformats
your drive and your information on the recovered drive will be
lost. Be sure to save your work first. If you have created other
partitions (for example, a D: drive) those partitions and any
information on them will not be affected and will remain intact.
A confirmation message appears, reminding you that all
information on the C: drive will be lost during the
recovery process. Be sure you have saved your work
before proceeding.
Advertisement
Table of Contents
