Table of Contents
Advertisement
58
Getting Started
Adding memory (optional)
NOTE
NOTE
11
Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector's notch with the
matching key in the socket.
notch
latch
key
(Sample Illustration) Aligning the memory module with the socket
12
Firmly press the memory module into the memory slot's
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the memory module into the
socket
If the memory slot is unavailable, you must remove the module
by performing steps
page
60.
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
2-3
of
"Removing a memory module" on
connector
latch
Advertisement
Table of Contents
