Advertisement
HINT: Prior to use, be certain the P100 is
turned on.
SCAL-100 must be "on" to transmit data.
IMPORTANT: P100s must be free of dirt
and dry, prior to testing.
WARNINGS:
Perform all tests in a gas-free area.
Check test gas expiration dates, prior to use.
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SENSIT Technologies SCAL 100 Series
Summary of Contents for SENSIT Technologies SCAL 100 Series
- Page 1 HINT: Prior to use, be certain the P100 is Quick-Start Instructions turned on. SCAL-100 must be “on” to transmit data. IMPORTANT: P100s must be free of dirt and dry, prior to testing. WARNINGS: Perform all tests in a gas-free area. Check test gas expiration dates, prior to use.
- Page 2 SCAL-100 QUICK-START INSTRUCTIONS 1. Find suitable location in gas-free area Desk or wall mount is possible. 2. Connect gas supply at 20psi inlet pressure. 3. Attach power supply (unit will turn on automatically). 4. Attach to LAN (Scal-N software installed separately) 5.
Need help?
Do you have a question about the SCAL 100 Series and is the answer not in the manual?
Questions and answers