Subscribe to Our Youtube Channel
Related Manuals for SENSIT Technologies SMART-CAL
Summary of Contents for SENSIT Technologies SMART-CAL
- Page 1 SMART-CAL C A L I B R A T I O N S T A T I O N opErAtIoN MANUAl MADE IN USA SENSIT Technologies is in compliance with ISO 9001:2008 1.800.561.8187 information@itm.com www. .com...
- Page 2 SMArt-CAl Station Set-up for SCal-N SMArt-CAl Station Set-up for SCal-D 1.800.561.8187 information@itm.com www. .com...
- Page 3 Instruments that have this feature have a window on the right side of the housing. The Smart-Cal™ calibrator will calibrate all instrument sensors, reset the instrument clock, perform a pump flow block test, allow review of the data on screen and perform bump tests.
- Page 4 Start Up “SMART-CAL™” will be displayed on the top line and “Version X.XX” on the bottom line for 2 seconds. Serial number will be displayed on the bottom line for 2 seconds. “Date” on the top line and the “Time”...
- Page 5 SENSIT TECHNOLOGIES Operational Buttons The Smart-Cal Station has a three button operation. The Left Button is to start the calibration process (Calibrate) or to return to the “Ready…” display (Clear) after the previous instrument has been tested. The Right button is the Bump Test. This allows the operator to test the instrument between calibrations for proper operation.
- Page 6 Performing a Bump Test To perform a bump test the instrument must be in the “Smart-Cal Communicating” mode. Pressing the right button will begin the process of testing LEL, CO, H2S (or combination required) sensors by applying the necessary gases (as determined by the instrument model number) for up to 30 seconds while looking for an instrument reading of at least 80% of the calibrated value.
- Page 7 This warranty covers normal use and does not cover damage which may arise from alteration, tampering, misuse, abuse, neglect or improper maintenance. SENSIT TECHNOLOGIES is not liable for lost data due to malfunction of Smart-Cal Calibration Station. Proof of purchase may be required before warranty is rendered.
- Page 8 1.800.561.8187 information@itm.com www. .com...
Need help?
Do you have a question about the SMART-CAL and is the answer not in the manual?
Questions and answers