Epson EMP-713 Owner's Manual page 24

Connecting the Mouse Cables
♦
8
Downloaded from:
1. If you will be viewing the video on your computer
monitor as well as the projector screen, disconnect the
monitor cable from the video port on the back of your
computer.
2. Connect one end of the computer cable to the projector's
Computer port.
3. Connect the other end of the computer cable to the
computer's video port.
4. Tighten the screws on all connectors.
If you want to use the remote control as a mouse, you need to
connect the PS/ 2 mouse cable or U SB mouse cable.
Note: The U SB m ouse port on the projector can only be used by
connecting a U SB m ouse. It is not possible to connect other U SB
equipm ent for use.
Refer to this illustration while following the steps below.
USB mouse port
http://www.usersmanualguide.com/
Mouse/Com port
USB mouse cable
PS/2 mouse cable