Toshiba 8100 User Manual page 122

96
Power Management
Starting where you left off
enabled, whenever you turn the computer on you'll be able to
continue working where you left off.
NOTE: Suspend/Resume (memory) mode is not available on
Windows 98 Second Edition.
You can enable Suspend/Resume (memory) mode in either of the
following ways:
❖
Click the Start menu button, then click Suspend.
❖
Press and hold the
F3
When the pop-up window appears, press and release
the Suspend/Resume (memory) mode icon is highlighted,
then release the
❖
Open the Power Saver utility in Control panel, click select
Battery Power, click Details, then click the System tab.
Select the Resume mode option and click OK.
With this option you can configure your system to:
❖
Automatically suspend/resume operations when you close or
open the display panel.
TECHNICAL NOTE: Never suspend the computer while a
storage device is being accessed. If you suspend the
computer and decide to continue working, wait a few
seconds before turning the computer on again.
Part I: Getting to Know Your Computer
key, then press and release the
Fn
key.
Fn
key.
F3
until
F3