Braun 720 Owner's Manual page 6

r e l e as e r e l e as e
washable washable
r e l e as e r e l e as e
washable washable
click! click!
r e l e as e r e l e as e
r e l e as e r e l e as e
washable washable
r e l e as e r e l e as e
r e l e as e r e l e as e
washable washable
r e l e as e r e l e as e
washable washable
6
Regular cleaning ensures better shaving
performance. Rinsing the shaving head under
running water after each shave is an easy and
fast way to keep it clean:
• Switch the shaver on (cordless) and rinse
the shaving head under hot running water.
You may use liquid soap without abrasive
substances. Rinse off all foam and let the
shaver run for a few more seconds.
• Next, switch off the shaver, press the release
button
1
• If you regularly clean the shaver under
water, then once a week apply a drop of
light machine oil on top of the foil and cutter
cassette.
Alternatively, you may clean the shaver using the
brush provided:
• Switch off the shaver. Remove the foil and
cutter cassette
surface. Using the brush, clean the inner area
of the pivoting head. However, do not clean
the foil and cutter cassette with the brush as
this may damage it.
washable washable
Keeping your shaver in top shape
Replacing the foil and cutter cassette/reset
To maintain 100% shaving performance,
replace the foil and cutter cassette
the replacement symbol lights up on the shaver
display
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the foil and cutter
cassette. Then the shaver will automatically reset
the display.
After you have replaced the foil and cutter
cassette, use a ball-pen to push the «reset»
70S 70S
button
counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
2
to remove the foil and cutter cassette
and let it dry.
1
and tap it out on a fl at
7
(after about 18 months) or when
6
for at least 3 seconds to reset the
1
, when