Swissvoice S24 Quick User Manual

S24
Quick user guide
INTRODUCTION
S24 is a 2G clam shell phone with 2.4 inches display.
S24 is a CARE PHONE with features :
• Loud speaker
• Talking dialing digits
• Easy charging base
• Talking caller ID name
• Photo speed dial
• SOS button
• SwissVoice Care features
KEYS DESCRIPTION
1
2
3
4
5
6
7
8
9
1 - Earpiece 7 - Camera Key
2 - Main display 8 - Dialing keypad
3 - Left selection key 9 - Microphone
4 - Navigation key 10 - Right selection key
5 - Answer/Call key 11 - End / Power key
6 - Photo memory Key 12 - Torch key
** is the hot key for switching the keypad input
between ABC, Abc, abc & 123.
** is the hot key for entering special symbol.
13
14
15
16
20
17
13 - Camera lens 18 - Headset jack
14 - Torch LED Flashlight 19 - Micro-USB socket
15 - Loudspeaker 20 - Volume control
16 - SOS key (Hearing, Ringer)
17 - Charging contacts
External LED
Flashing Red - Battery low
Flashing White - Incoming call
Flashing Green - Message / Missed call Flashing
DISPLAY ICONS
Vibrate then Ring
Vibrate only
Silence
Red – Ring; Green –
1
Ring & Vibrate
Signal strength
Note! All the diagrams are for illustrative purposes. It may be
slightly different from the actual unit.
In keeping with our environmental preservation and
compliance commitment, we include Quick Start Guide in
our packaging. For digital copy of user manual and useful
information, please visit our website or contact our Helpline.
www.swissvoice.net
GET STARTED
Installing the SIM card, memory card and
battery
ATTENTION :
• Risk of swallowing small objects! The SIM card & memory
card can be removed. Small children can swallow them.
• Do not bend or scratch the SIM card. Prevent any contact
with water, dirt or electrical charges.
• Turn off the phone and disconnect the charger before
removing the battery cover.
Remove the battery cover
10
11
12
Insert the SIM card (required) and the memory
card (optional)
- Place the SIM card in the SIM card holder with the golden
contacts facing down. Close the SIM card metal cover and lock
it.
- To expand the internal storage memory, you can insert
a microSD memory card ( maximum capacity of 32 GB / not
included). Insert the memory card into the slot until it stops as
illustrated.
Insert the battery and replace the battery
cover
18
- Insert the battery into battery compartment with golden
19
contacts of the battery facing downwards to the right of the
phone. Press lightly on the top end of the battery until it
snaps into place.
- Replace and secure the battery cover until it clicks into
place.

Charge the phone

A
Battery power
Bluetooth ON
Roaming
- Connect the USB plug of the adaptor to the charging
Headset Plugged in
socket (A) or place the device in the cradle (B).
ATTENTION:
• Only use battery, charger and accessories that have been
approved for using with this particular model. Connecting
other accessories may be dangerous and may invalidate the
Warranty.
• When charging the battery for the first time, it should be
charged for at least 4 hours.
1st USE SETUP
-
Long press
-
- Input HH:MM >
> Save
( Press Menu >
modify the detailed settings )

BASIC OPERATION

Turn the Phone ON/OFF

- Long press

Make a Call

- Enter the number 0.....9 ( Press Clear to delete )
- Press
for Handset )
- Press

Call from phonebook

- Press
or
Press Names >
- Press
- Press

Receive a Call

- Flip up the phone or press
- Press
Adjust the earpiece Tone frequency
- Press Menu >
1. Normal frequency
2. Low frequency
3. High frequency
Adjust the earpiece loudness
- During a call, press
Settings ( Ring tone & Volume )
- Press Menu >
- Under the Settings menu, the following options can also
be accessed
1. Profiles
2. Phone ( Setting Date/Time, Languages,.... )
3. Charger LED ( Activate / Deactivate )
4. Tone Control
5. Call settings
6. Security (password : 1122)
7. Restore (password : 1122)
( Press Menu >
Customize..... User can select the Ring tone, Volume and
others )

CALL Log

- Press Menu >
1. Missed
2. Dialled
3. Received
- Press
- Press

ADD Phonebook contact

- Press Menu >
> Add
1. Name > input the name
2. Number > 0....9
3. Caller ringtone > select ring tone
4. Options > Save
OR B
to power up the phone
to select the desired language > OK
> DD/MM/YYYY > > 12Hr/24Hr >
> Settings > Phone > ..... User can
to dial ( Press H-Free for Handsfree. Press H-Held
to end the call
> to select the 10 photo memory;
to select the number
to dial
to end the call
to answer
to end the call
> Settings > Tone Control....
to adjust the loudness
> Settings >....
> Settings > Profiles > General >
> Call Log >.....
to select the desired number
to dial out
> Phonebook > > Normal >