Toshiba L300-EZ1004X User Manual page 78

78
Getting Started
Turning off the computer
4 Select Hibernation for the options you want.
NOTE
❖
❖
5 Click Apply.
6 Click OK.
NOTE
Once the computer is configured, you can place it into Hibernation
mode by either pressing the power button or closing the display
panel, depending on the Hibernation options set.
Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the power
button until the on/off light glows green. The computer returns to
the screen(s) you were using.
If you put the computer in Hibernation mode by closing the display
panel, you can start it again by opening the display panel.
These options are set separately for how they operate while the
computer is running on battery power or while connected to AC
power.
When I press the power button
Set this option to Hibernate if you want the computer to
go into Hibernation mode when you press the power
button.
When I close the lid
Set this option to Hibernate if you want the computer to
go into Hibernation mode when you close the display
panel.
For more information about the Power Saver utility, see
Power Saver" on page 144.
"TOSHIBA