Cleaning The Nicview Hardware - natus NICVIEW 2 Instructions For Use Manual

Features

Privacy Mode: The privacy mode is used to suspend the streaming video during infant care or
anytime the caretaker wishes to suspend the video.

Camera Mounting Arm: The mounting arm includes a clamp which can be attached to the
NICVIEW roll stand, hospital IV pole, post of a wall mount system, or post accessory of an
incubator or radiant warmer. The camera is screwed onto the threaded end piece. Remember
to plug in the Micro USB cable and the Ethernet cable when attaching to the arm. Each arm has
adjustment points that allow the clinician to position the cameras at a 45 degree angle from the
side of the bed space without obstructing other medical devices or clinical workspace.
Using NICVIEW 2
NICVIEW 2 features a virtual "Privacy Mode" to enable facility staff to manually suspend video
streaming when caring for the infant. When the camera is in "Privacy Mode" an "Offline Image" is
displayed to the parent/family viewing the infant on their personal device(s). A facility administrator
has the option to upload a custom "Offline Image" or to utilize the NICVIEW default image provided.
To Enable Privacy Mode

Gently press the viewfinder screen on the front of the camera.
To Re-enable Video Streaming

Gently press the viewfinder screen on the front of the camera.
NOTE: Please remember to re-enable video streaming when "Privacy Mode" is no longer necessary.

3. CLEANING THE NICVIEW HARDWARE

The following instructions are specific for use on the cameras and arms. Standard disinfectant procedures still
apply.
 Use water, a light concentration of disinfectant, or solvent to avoid damaging the materials
 Soft cloths or wipes are preferred for cleaning:
o Ensure cloths are not overly moist
o Avoid the charging port when cleaning
The following supplies are OK to use when cleaning the NICVIEW 2 equipment
70% Isopropyl Alcohol
NICVIEW Instructions for Use
o
Pressing this screen will cause the image to blur on the viewfinder and a Privacy
Mode Enabled message will be displayed. The viewfinder can still be used to
position the baby within the image although it is blurred.
o
Video Streaming will be suspended and an "Offline Image" will be displayed to
parents/family members that are viewing the infant on their personal device(s).
o
Pressing this screen will cause the video streaming to resume and a Streaming
message will be displayed on the screen allowing the infant's video to be observed.
o
The "Offline Image" will no longer be displayed on the family member's device,
allowing parents/family to view the video feed.
P/N 028158 Revision Date February 5, 2020 7