Toro Greensmaster TriFlex 3400 Operator's Manual page 15

Figure 10
1. Traction pedal—forward
2. Taction pedal—reverse
Ground speeds are as follows:
•
3.2 to 8 km/h (2 to 5 mph) forward mowing speed
•
16 km/h (10 mph) maximum transport speed
•
4.0 km/h (2.5 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal (Figure
steering arm for operator comfort, then, release the
pedal to lock the arm in place.
Throttle Lever
The throttle lever (Figure
speed of the engine. Move the throttle lever toward
the F position to increases the engine speed;
AST
move it toward the S
LOW
engine speed.
3. Steering-arm-locking
pedal
Figure 11
10) and raise or lower the
12) allows you to control the
position to decrease the
Note:
You cannot stop the engine using the throttle
lever.
g014603
1. Throttle lever
2. Raise/Lower mow control
3. Functional-control lever
4. Ignition switch
5. Engine-oil-pressure light
Raise/Lower Mow Control
Moving the control
operation lowers the cutting units and starts the reels.
Pull back on the control to stop the reels and raise
the cutting units. During operation, you can stop the
reels by pulling back on the control momentarily and
g005105
releasing it. Start the reels by moving the control
forward.
Functional-Control Lever
The functional-control lever
traction selections plus a N
shift from mow to transport or transport to mow (not
to neutral) while the machine is in motion; no damage
will result.
•
R position—neutral and backlapping
EAR
•
M position—used for mowing operation
IDDLE
•
F position—used for transport operation
RONT
Ignition Switch
Insert the key into the switch
clockwise as far as possible to the S
to start the engine. Release the key as soon as the
engine starts; the key moves to the O
15
Figure 12
6. Battery-warning light
7. Service-indicator light
8. Glow-plug-indicator light
9. Water-temperature light
(Figure 12) forward during
(Figure 12) provides 2
position. You can
EUTRAL
(Figure 12) and turn it
TART
position. Turn
N
g032816
position