Safety Guidelines; Introduction; Features; Order Information - Pewatron Mean Well RCP-1600 Series User Manual

3
0.

Safety Guidelines

◎ Risk of electrical shock and energy hazard, all failure should be examined by a qualified technician. Please do not remove the case from the
supply/charger or rack shelf unit by yourself.
◎ Please do not change any component on the unit or make any kind of modification on it.
◎ Please do not install the unit in places with high moisture, high ambient temperature or under direct sunlight.
◎ The input voltage range is 100- 240Vac (50/60Hz), please do not feed in voltage that is over or less than 10% of that range.
◎The safety protection level of this unit is class I. The" Frame Ground"( ) on the rack shelf unit must be well connected to PE (Protective Earth).

1.Introduction

1.1 Introduction
The RCP-1600 is a rack mountable power supply that provides energy source for telecom equipments, monitoring systems, severs, etc, installing into a
19" rack shelf is required for
for operation.
1.2 Features Description
◎ 44 mm low profile, suitable for standard 1U rack applications
◎ Universal AC input/Full range
◎ Built-in active PFC function,
◎ Protections: short circuit/overload/over voltage /over temperature
◎ Active current sharing up to 8000W (5 units) in one 19" rack
◎
Remote control for
◎ Built-in remote sense function for
◎ Built-in battery temperature compensation function for
◎
Output voltage programming
◎
Output current programming
◎
Hot Swap operation
◎
AC OK and DC OK signal outputs
◎ Forced air cooling by built-in DC fan with fan speed control function
◎
5V/0.3A and 12V/0.8A auxiliary output
◎
Built-in ORing FETs。
◎
PMBus serial data transmission function
◎
5 years warranty
1.3

Order Information

1.3.1 Explanation for Encoding
Single unit : RC P -1600-
1U Rack : RHP-1U
1.3.2 Marking
◎Please refer to the safety label on the top of the unit before
◎S
upply Charger unit /
E183223
LEVEL5
Bauar t gepruft
Sicherheit
egel ma ge
od o s
be wac g
www. tuv.com
ID 2000000000
Figure1-1 safety label of RCP-1600
RCP-1600,RCB-1600,RHP-1U
operation . The RCB-1600 is a rack mountable charger, used to charge batteries, installing into a 19" rack shelf is required
PF>0.98
。
each unit of RCP/RCB-1600
RCP-1600
RCB-1600
12
Output Voltage
P : Rack Power
B : Battery Charger
I -A
I : IEC320-C14 AC Inlet
T : Terminal Block
RCP-1600-12
INPUT: 100-109VAC 12.5A
50/60Hz
INPUT: 110-199VAC 13.0A 50/60Hz
INPUT: 200-240VAC 10.0A
50/60Hz
OUTPUT : +12V 75A (For INPUT 100-109VAC)
OUTPUT : +12V 87.5A (For INPUT 110-199VAC)
OUTPUT : +12V 125A (For INPUT 200-240VAC)
MEAN WELL ENTERPRISES CO., LTD.
+
,
No. 28 Wuquan 3rd Rd., Wugu Dist.,
New Taipei City 24891, Taiwan
Manual:www.meanwell.com/manual.html
+V ADJ MADE IN TAIWAN
User's Manual
; (
shelf up to 3 rack shelves 15 units maximum) can be connected in parallel for RCP-1600
use (Figure 1-1~1- ) 5
INPUT:
INPUT:
INPUT:
OUTPUT : +14.4V
OUTPUT : +14.4V
OUTPUT : +14.4V
E183223
LEVEL5
Bauar t gepruft
Sicherheit
egel ma ge
od o s
be wac g
+V ADJ
www. tuv.com
ID 2000000000
Figure1-2 safety label of RCB-1600
RCB-1600-RHP-1U_1610-21407-0001-E-0420
RCB-1600-12
100-109VAC 12.5A
50/60Hz
110-199VAC 13.0A
50/60Hz
200-240VAC 10.0A
50/60Hz
60A (For INPUT 100-109VAC)
70A (For INPUT 110-199VAC)
100A
(For INPUT 200-240VAC)
MEAN WELL ENTERPRISES CO., LTD.
+
,
No. 28 Wuquan 3rd Rd., Wugu Dist.,
New Taipei City 24891, Taiwan
Manual:www.meanwell.com/manual.html
MADE IN TAIWAN
1