Table of Contents
Advertisement
78
Learning the Basics
Using the DVD-ROM or Multifunction drive
Inserting a disc
5
Gently press the center of the disc onto the spindle until it
locks into place.
Spindle
Disc
Positioning the disc on the spindle
6
Close the disc tray by pressing gently on the center of the
tray until it clicks indicating that it is locked.
Be careful not to touch the drive's lens (located underneath the
drive's spindle) or the area around it. Doing so could cause the
drive to malfunction.
Make sure the disc is properly positioned on the spindle. If
you position the disc incorrectly, it can jam the disc tray.
Correct position
Incorrect position
Incorrect position
Advertisement
Table of Contents
