Toshiba P15-S470 User Manual page 64

64
Getting Started
Installing additional memory (optional)
4 Using a standard Phillips no. 1 screwdriver, unscrew the
two screws that secure the expansion memory slot cover,
then remove the memory slot cover.
Removing the memory slot cover
5 Put the screws and the cover in a safe place so that you
can retrieve them later.
6 Remove the memory module from its antistatic
packaging.
7 Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
8 Gently put the memory module connector down at an
angle and press down until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its gold connector bar (on the side you insert into the
computer).