Toshiba P15-S470 User Manual page 63

Installing additional memory (optional)
pcsupport.toshiba.com). There are two memory slots. Your
system may have both slots occupied.
If you use the computer for a long time, the memory modules
will become hot. If this happens, let the modules cool to room
temperature before you replace them.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
To avoid damaging the computer's screws, use a standard
Phillips no. 1 screwdriver that is in good condition.
If you are adding memory after you have started to use the
computer, begin at step 1, otherwise skip to step 2.
1 Turn off the computer via the Start menu.
See "Using Shut down" on page
The operating system turns off the computer.
2 Unplug and remove any cables connected to the
computer.
3 Close the display panel and turn the computer upside
down to locate the expansion memory slot cover.
Memory slot cover
Base of a Satellite P15 series computer
Getting Started
94.
63