Toshiba L515-S4925 User Manual page 188

188
If Something Goes Wrong
Resolving a hardware conflict
sensitive. Toshiba provides a Client Manager utility for setting
and managing SSIDs.
Check the Control Panel's Hardware and Sound Device
Manager to verify that the Wi-Fi
Windows
Carefully note any error messages—these will be very helpful
if you should confer with a support technician at a later time.
Verify that the network connection is configured to obtain its
Internet Protocol (IP) address dynamically:
1
2
3
4
5
Use IPCONFIG to verify that the computer has a useful IP
address—one other than the private address of
169.254.xxx.xxx assigned by Windows
1
2 Type
3
4
The IP address for each active network adapter will be
displayed.
Connect your computer directly to your router or broadband
modem, by plugging a standard CAT5 Ethernet patch cable
(sold separately) into your computer's RJ45 Ethernet port. If
your connection problem disappears, the problem lies in the
Wi-Fi
Use the PING command to verify a connection to the gateway
at 192.168.1.1 (a default gateway for most wireless routers).
1
2
3
®
operating system, and that the driver is loaded.
Click Start, and then Network.
Click View Status.
Click Details.
Verify that the DHCP Enabled setting is set to Yes.
Click Close.
Click Start to open the Start menu.
Cmd in the search field.
At the top-left of the Start menu, click
command prompt.
Enter IPCONFIG /ALL
®
part of your network.
Click Start to open the Start menu.
Type in the search field.
Cmd
At the top-left of the Start menu, click
®
adapter is recognized by the
®
.
and press Enter .
to open the
cmd.exe
.
cmd.exe