Attachment Safety; Maintenance And Storage Safety; Safety And Instructional Decals; Product Overview - Toro 23165 Operator's Manual

Attachment Safety

•
Always lower the attachment each time you shut
off the machine or leave the operating position.
•
Clean any dirt or debris that may hinder connecting
the attachment to the machine. Ensure that the
attachment-locking pins are fully seated in the
holes of the attachment-mount plate. Refer to the
Operator's Manual for the machine for detailed
information on safely connecting an attachment to
your machine.
•
When lifting the attachment keep it level and
prevent the load from spilling backward.
•
Do not allow anyone to stand on the attachment or
ride it in any way.
•
For wheeled traction units, the attachment can be
used with or without the counterweight.
Maintenance and Storage
Safety
•
Check fasteners at frequent intervals for proper
tightness to ensure that the equipment is in safe
operating condition.
•
Refer to the Operator's Manual for important
details if you store the attachment for an extended
period of time
•
Maintain or replace safety and instruction labels,
as necessary.
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. Tipping hazard—read the Operator's Manual; do not
exceed loads of 150 kg (330 lb); for TX 413 models, do not
exceed loads of 100 kg (220 lb).
110-0081

Product Overview

1. Leveler

Specifications

Note:
Specifications and design are subject to
change without notice.
Overall width
Overall length
Overall height
Weight
Load rating capacity (per SAE
J1197)
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro
delivers replacement parts designed to the exact
engineering specification of our equipment. Use only
Toro genuine parts.
decal110-0081
4
Figure 3
2. Attachment plate
80 cm (31 inches)
105 cm (41 inches)
69 cm (27 inches)
74 kg (162 lb)
150 kg (330 lb)
100 kg (220 lb) for
TX 413 models
g001396