Table Of Contents - Toro 22445 Operator's Manual

This product complies with all relevant European directives.
For details, please see the Declaration of Incorporation (DOI)
at the back of this publication.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Introduction
This tiller is intended to be used on a Toro compact utility
loader. It is designed primarily for breaking through hard soil
conditions on residential or commercial properties. It is not
designed for breaking through materials other than soil. It is
not designed for use on non-Toro traction units.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers
of your product ready. The model and serial numbers are
printed on a plate located on the right side of the drive head.
Write the numbers in the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety-alert symbol
This manual also uses 2 words to highlight information.
Important calls attention to special mechanical information
© 2015-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
(Figure
Figure 1
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
Stability Ratings....................................................... 3
Safety and Instructional Decals ................................. 4
Product Overview .......................................................... 4
Specifications ......................................................... 4
Attachments/Accessories......................................... 4
Operation ..................................................................... 5
Maintenance .................................................................. 6
Recommended Maintenance Schedule(s) ....................... 6
Greasing and Lubrication ......................................... 6
............................................................................. 6
Adjusting Tiller Drive Chain Tension ......................... 6
Replacing the Tiller Tines ......................................... 7
Storage ......................................................................... 8
Troubleshooting ............................................................ 9
1),
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved