Filling The Bucket - Toro 22478 Operator's Manual

Important:
Do not use the floor to pick or pull
objects. This damages the floor / bucket and will
void the bucket warranty (Figure 4).
Figure 4

Filling the Bucket

1. Position the bucket level to the ground.
2. Drive forward and insert the bucket into the pile
of material.
3. When the bucket is full, drive the machine in
reverse and gently tilt the bucket rearward to
decrease the lifting resistance when you lift the
load.
Important:
ground; refer to
g305386
9
Always carry loads close to the
Transport Position (page
Figure 5
10).
g266856