Table of Contents
Advertisement
WARNING
Exceeding the maximum recommended slope
can cause the traction unit to tip, crushing you or
bystanders.
Do not drive the traction unit on a slope steeper
than the maximum recommended slope, as
determined in the following tables and the traction
unit Operator's Manual .
Important: If you have a traction unit other than the
TX, the bore drive head is rated for use without the
counterweight. If you use the counterweight with the
boring unit, the traction unit will be less stable in the
front and side uphill positions.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Warning—read the
Operator's Manual.
2. Entanglement hazard,
shaft—keep bystanders
a safe distance from the
machine.
99-9945
3. Explosion and electric
shock hazard—do not dig
in areas with buried gas
or electrical lines; contact
local power organizations
before digging.
Stability Rating
Orientation
Front Uphill
Rear Uphill
Side Uphill
Product Overview
Specifications
Note: Specifications and design are subject to change
without notice.
Width
Length
decal99-9945
Height
Weight
Boring diameter
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor.
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro genuine
parts. When it comes to reliability, Toro delivers replacement
parts designed to the exact engineering specification of our
equipment. For peace of mind, insist on Toro genuine parts.
5
Stability Rating
D
B
C
61 cm (24 inches)
56 cm (22 inches)
63.5 cm (25 inches)
54 Kg (120 lb)
3.2 to 8.9 cm (1.25 to 3.5
inches)
Advertisement
Table of Contents
