Requirements On The Concentric Flue System - Bellfires Room Divider Large 3 CF Preparation Manual

Hide thumbs Also See for Room Divider Large 3 CF:

Table of Contents

Requirements

(**) If an obstruction protrudes at least 0.5 meter between the item and the outlet and the

obstruction has a lenght of at least the recommended minimum distance, ignore the

recommended minimum distance.

4 4 .5

Requirements on the concentric flue system

The parts that are required for the installation of the concentric flue system are numbered

in the illustrations and refer to the part list in

Use the universal wall/floor support (number 36 in the part list) to attach the concentric

flue system to the casing and/or the floor.

Install a concentric flue system as described in this section.

Some configurations of the concentric flue system require the installation of a flue

restriction plate. Different sizes of the flue restriction plate are delivered with the

appliance. Refer to the Installation and maintenance manual.

Caution:

•

Make sure that no flammable materials are located close to the flue

system. The outer walls of the flue system can be 150 °C.

•

Make sure that the concentric flue system is in a casing.

•

Make sure that the casing is made of heat resistant material.

•

Make sure that air can flow in the casing. Use grates near the floor and

near the ceiling. Do this for every floor where the casing is located.

•

Do not insulate the concentric flue.

Floor support

Wall support

Room divider Large 3

Table of Contents

Room divider large 3 lf Room divider large 3 mf Room divider large 3 l cfRoom divider large 3 l lfRoom divider large 3 l mfRoom divider large 3 r cf ... Show all