Troubleshooting - Toro Sitework 22414 Operator's Manual

6. Store the attachment in a clean, dry garage or storage
area. Cover it to protect it and keep it clean.

Troubleshooting

PROBLEM
Blade will not change angle.
POSSIBLE CAUSES
1. Hydraulic coupler not
completely connected
2. Defective hydraulic coupler
3. An obstruction in a hydraulic
hose
4. Auxiliary valve on the traction
unit is not opening.
5. Defective hydraulic cylinder
5
CORRECTIVE ACTION
1. Check and tighten all couplers.
2. Check couplers and replace
any that are defective.
3. Find and remove the
obstruction.
4. Repair the valve.
5. Replace or repair defective
cylinder.