Directing The Display Output When You Turn On The Computer - Toshiba A100-S2211TD User Manual

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 Press
2 While holding down
setting you want takes effect. Briefly pause each time you
press the
This hot key cycles through the settings in the following
order:
❖
❖
❖
❖
❖
3 Release the
and simultaneously.
Fn F5
key to allow time for the display to change.
F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
TV and LCD
TV only
key.
Fn
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel, Appearance and Themes, and then Display.
Choose the Settings tab, click the Advanced button, select
Display Device, select the applicable Monitor type, and click
Apply or OK.
Getting Started
Using external display devices
, press
Fn F5
repeatedly until the
69
+ ):
Fn F5