Fan Motor And Fan; Step Motor; Drain Hose - Lennox MCA Series Service Manual

Step 5.
Pull out the evaporator.

18.1.4. Fan Motor and Fan

NOTE: Remove the front panel and electrical parts
(see "Front Panel" on page 32, "Electrical
Parts" on page 34 Electrical parts and "18.1.3.
Evaporator" on page 36) before disassembling
fan motor and fan.
Step 1. Remove the two screws and remove the fixing
board of the fan motor.
Step 2. Remove the bearing sleeve.
Step 3.
Step 4.

18.1.5. Step Motor

NOTE:
Step 1.
Screws

18.1.6. Drain Hose

Step 1.
37
Remove the fixing screw.
Pull out the fan motor and fan assembly from the
side.
Remove the front panel and electrical parts (see
both "Front Panel" on page 32 and "Electrical
Parts" on page 34 Electrical parts) before
disassembling step motor.
Remove the two screws, then remove the
stepping motor.
Stepping Motor
Rotate the fixed wire clockwise indicated in
imagine below.
Fixing Screw