Evaporator - Lennox MCA Series Service Manual

Step 10. Pull out the electrical main board along the
direction indicated in right image to remove it.
Terminal S
Display
Board
RoomTemp Sensor
Pipe Temp Sensor

18.1.3. Evaporator

NOTE:
Remove the front panel and electrical parts (see
both "Front Panel" on page 32 and "Electrical
Parts" on page 34 Electrical parts) before
disassembling evaporator.
Step 1. Disassembly the pip holder located at the rear of
the unit.
Step 2. Remove the one screw on the evaporator located
at the fixed plate.
Terminal 1L
Terminal W
Pipe Header
Screw
Step 3.
Release the hook on the evaporator.
Step 4.
Remove the one screw on the evaporator located
oat the fixed plate.
36