Part Names And Functions; Tv (Front View); Tv (Rear View) - Sharp AQUOS LC-60LE831E Operation Manual

Part names and functions

TV (front view)

Illumination LED*
1
OPC sensor
Remote control sensor
I 3D mode: Blue illumination
2D mode: White illumination
J This panel emits infrared signal towards the 3D glasses you wear when viewing 3D
images. Do not place anything between the 3D infrared emitter on the TV and the
infrared receiver on the 3D glasses. Refer to page 67 for details.

TV (rear view)

USB 3 ( WIRELESS LAN) port
USB 2 (HDD) port
ETHERNET (10/100) terminal
Satellite antenna terminal
(830 series only)
K The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC
AUDIO (L/R)). However, the proper item must be selected in the "Audio select" menu
(refer to page 43 for details).
TV (rear view) — continued
3D infrared emitter*
2
HDMI 2/PC AUDIO (L/R)
jack* 3
L
DIGITAL AUDIO OUTPUT
terminal
M
Antenna terminal
WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended
Important information:
Satellite services are only available for the 830 model series.
7
MAIN POWER switch*
4
RS-232C terminal
PC terminal
EXT 1 (RGB) terminal
EXT 2 (VIDEO/AUDIO
(L/R)) terminal
EXT 3 (Component/
AUDIO (L/R)) terminal
When the MAIN POWER switch is turned off (a), the amount of electric power
consumed will be reduced to 0.01 W or less. However, unlike when unplugging the AC
cord, the power is not completely disconnected.
When a cable is connected to the OUTPUT terminal, the speakers do not output
sound.
listening at high volume levels.
SD CARD
(VIDEO STORE) slot
OUTPUT (Headphones/
AUDIO (L/R)) terminal*
5
USB 1 port
HDMI 1 (HDMI/ARC)
terminal
HDMI 2 (HDMI) terminal
HDMI 3 (HDMI) terminal
HDMI 4 (HDMI) terminal
C.I. (COMMON
INTERFACE) slot