Individual Setting - Language - Sharp AQUOS LC-60LE831E Operation Manual

Basic adjustment

Individual setting - Language

View setting
Digital audio language
Set up to three preferred multi audio languages to
display if the audio languages are available.
Go to "Menu" > "Setup" > "View setting" >
"Individual setting" > "Digital audio language".
E
Switching the multi audio languages
Each time you press 7 on the remote control unit,
the audio language switches.
View setting
Subtitle
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if
subtitles are available.
Go to "Menu" > "Setup" > "View setting" >
"Individual setting" > "Subtitle".
Selectable items
E
1st language
E
2nd language
E For hearing impaired
E
Switching subtitle languages
Each time you press [ on the remote control unit,
the subtitle switches.
Off 1st language
E
Set "For hearing impaired" to "Yes"
Subtitles for the hearing impaired have priority over
each of the subtitle language settings (e.g., "1st
language", "2nd language", etc.).
EXAMPLE
1st language
(For hearing impaired)
NOTE
• Subtitles will not be displayed when the programme
does not contain subtitle information.
• Subtitles may not be displayed properly in 3D mode.
View setting
Language
You can select an OSD language from among 23
languages. Refer to the OSD language column in
the specification table for the selectable languages
(Page 78).
Go to "Menu" > "Setup" > "View setting" >
"Language".
2nd language
1st language
41