Sharp AQUOS LC-70LE836E Operation Manual page 40

Basic adjustment
Buttons for "Manual adjust" operation
Press R button.
Lock
When the service is locked, you must enter your
PIN whenever you tune to the service.
Press G button.
CH skip
Services with a ✔ mark are passed over when
pressing :r/s on the TV or remote control
unit.
Press Y button.
Delete
The selected service is deleted. If you want
to watch the service you deleted once again,
perform "Auto installation", "Additional search",
or "Manual search".
Press B button.
Sort
The item position of services can be sorted.
Press a/b to select the service whose
1
item position you want to move, and then
press ;.
Press a/b to move it to the desired
2
position, and then press ;.
Repeat steps 1 and 2 until all desired
3
service items are sorted.
Cable
You can reconfigure the following settings when you
select "Cable" in the initial auto installation or the
"Auto installation" menu.
E
Additional search
Use this menu to add new services automatically
after "Digital search" in the "Auto installation"
menu has been completed. Follow steps 1 to 5 in
Searching for cable broadcasts on page 15.
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the
TV starts searching.
• Refer to the table about menu items in the centre
column on page 15.
Frequency
Symbol rate
QAM modulation
Search start
E
Manual adjust
This function is the same as in "Terrestrial". Refer to
"Manual adjust" in "Terrestrial".
NOTE
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
38
Satellite setting (835 series only)
Before selecting the type of search in "Satellite
setting", you need to select the satellite broadcast.
E
Additional search
Use this menu to add new services automatically
after auto installation has been completed. Follow
steps 1 to 6 in the right column on page 17.
E
Manual search
Add new services within a specified frequency band.
MHz
After setting the items on the following screen,
select "Yes" from "Search start" menu.
Band [Vert/Low]
Frequency
Symbol rate
Search start
E
Manual adjust
This function is the same as in "Digital setting".
Refer to "Manual adjust" in "Digital setting".
SAT2 [Hot Bird 13E]
SAT3 [None]
SAT4 [Turksat]
Vert/Low
Vert/High
Horiz/Low
Horiz/High