Sharp AQUOS LC-70LE836E Operation Manual page 35

Basic adjustment
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to "Menu" > "Setup" > "Picture" >
"Advanced".
C.M.S.-hue
This function adjusts the hue of a selected colour
using a six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation
of a selected colour using a six-colour adjustment
system.
C.M.S.-value
This function adjusts the brightness of a selected
colour using a six-colour adjustment system.
Colour gamut range
Adjusts the range of a subset of colour to display
the image. Expanded colour gamut means more
colourfulness; images become more vivid.
Item
Standard colour gamut.
Standard
More vivid colour with expanded
Expanded
colour gamut.
NOTE
• This function is available only when selecting "MOVIE"
or "MOVIE (3D)" from the "AV mode" menu.
Colour temp.
Adjusts the colour temperature to give the best
white image.
Item
White with bluish tone.
High
Intermediate tone between "High"
Mid-High
and "Middle".
Natural tone.
Middle
Intermediate tone between "Middle"
Mid-Low
and "Low".
White with reddish tone.
Low
Finely adjusts each colour
temperature between 1 to 10
10 point setting*
points.
Adjusts the white balance by
R/G/B Gain (LO),
changing the value of each item.
R/G/B Gain (HI)
* "10 point setting" is available only when selecting
"STANDARD", "MOVIE", "STANDARD (3D)", or "MOVIE
(3D)" from the "AV mode" menu.
Scanning backlight 200
"Scanning backlight 200" technologies provide
superior solutions for digital display picture quality
removing motion blur ("Scan", "High", "Low", "Off").
NOTE
• This effect is greater on fast moving images.
• These functions will have no effect in the following
cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to "Off".
33
Sub pixel control
Reproduces high-definition images with higher
resolution.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e 2 to a
minimum of f 2.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending
on the vertical frequency), analyses it and then
recreates each still film frame for high-definition
picture quality ("Advanced (High)", "Advanced
(Low)", "Standard", "Off").
NOTE
• You can select "Advanced", "Standard" and "Off" in 3D
mode.
Active contrast
Automatically adjusts the contrast of an image
according to the scene.
DNR
"DNR" produces a clearer image ("Auto", "High",
"Middle", "Low", "Off").
NOTE
• This function may not be available depending on the
input signal type.