Advertisement
CONFIGURATION EXAMPLES
The following are just indicative examples to illustrate how module AC120 can
be configured.
BUTTON N°1:
Vehicle alarm
BUTTON N°2:
Vehicle panic alarm
Fig. 6
If remote control buttons are configured as shown in
control can be used to manage vehicle alarm (buttons 1 and 2), open gate
(button 3), turn ON outdoor lighting or open garage door (button 4).
To set up outdoor lighting in automatic or
Settings
table.
BUTTON N°1:
Vehicle alarm
BUTTON N°2:
Vehicle panic alarm
Fig.7
Configuration shown in Fig.7 requires the use of two AC120 modules, one at
home and the other at work, with buttons N°1 and N°2 assigned to your
vehicle.
Page 5
BUTTON N°3:
Gate opening
BUTTON N°4:
Outdoor lighting
or garage door
Fig.6
, a single remote
manual mode, see
Dip-Switch
BUTTON N°3:
Home or Office
gate opening
BUTTON N°4:
Outdoor lighting or
home garage door.
Company perimeter
lighting.
Two modules can be associated to the same remote control and therefore be
configured differently.
Same thing can be done with 3 modules (home, work and cottage). There is
no limit to the number of AC120 modules you can program.
BUTTON N°1:
Home gate
BUTTON
N°2:
Garage door
Fig.8
Configuration shown in
Fig.8
requires the use of two AC120 modules, both
for the same premises.
TECHNICAL SPECIFICATIONS
Power Supply
Current consumption
Transmission frequency
Relay contact range
Timer
Number of output channels
Pulse switch relay
Storing memory
BUTTON
N°3:
Automatic
outdoor
lights
BUTTON
N°4:
Perimeter lighting
12-30 V ac/dc
7,3 mA @ 13,8 Vdc
433,92 Mhz
10A @ 12-24V
Approx. 4½ min.
2
0,5 seconds
60 or 120 remote controls
Page 6
Advertisement
