Download Print this page

Gemini AC120 Installation Manual

Remote control receiver module

Download this manual

INSTALLATION CERTIFICATE

The undersigned qualified installer attests having personally installed the

remote receiver module on the premises indicated below, in accordance

with manufacturer instructions.

By :

Sold on

...................................

Device

Remote Control Receiver

Address:

...........................................................

Signature:

................................................................................

GEMINI Technologies S.p.A.

Via Luigi Galvani 12 - 21020 Bodio Lomnago (VA) - Italia

Tel. +39 0332 943211 - Fax +39 0332 948080

www.gemini-alarm.com

ISO 9001 Certified Company

Module AC120

REMOTE CONTROL

RECEIVER MODULE

AC120

INSTALLATION

MANUAL

Made in Italy

AC2576 Rev.02 - 10/13

Page 1 REMOTE CONTROL RECEIVER MODULE AC120 Sold on ..............INSTALLATION Device Remote Control Receiver Module AC120 MANUAL Address: ........................Signature: ................GEMINI Technologies S.p.A. Via Luigi Galvani 12 - 21020 Bodio Lomnago (VA) - Italia Tel. +39 0332 943211 - Fax +39 0332 948080 www.gemini-alarm.com...
Page 2 1 2 3 4 5 6 Module AC120 is configurable via 6 dip-switches: The AC120 is a multi-function compact receiver which can store up to 120 GEMINI, 2-button or 4-button, remote controls. It can be used for control of N°1-2-3 => operation of relay1 alarm systems, remote gate opening, garage door control, etc.
Page 3 When the selected remotes have been deleted, disconnect and reconnect the module to restore normal operating mode. NB: If the Eeprom memory is full, the LED on the AC120 module will blink on entering learn mode to indicate that no other device can be learned.
Page 4 Pulse switch relay 60 or 120 remote controls Storing memory Configuration shown in Fig.7 requires the use of two AC120 modules, one at home and the other at work, with buttons N°1 and N°2 assigned to your vehicle. Page 5...