Advertisement
8
9
Linking Multiple Units
1
2
3
Connect lid
to dispenser shroud.
Lower lid onto
dispenser. Push
down evenly on
both ends until you
hear a snapping sound.
To remove lid
Push the tab on the back of the dispenser.
Simultaneously grip nozzle covering firmly
and pull the lid upward.
Connect foot plate
to dispenser by slightly tilting dispenser
onto one of the foot plate hooks. Press
down on the lid until you hear a snap.
Link another dispenser
Attach a new foot plate to previous
foot plate then repeat Step 1.
To disconnect a dispenser:
Push down on one of the release-buttons
on the foot plate, then slightly tilt the
dispenser in the opposite direction.
Advertisement
