Advertisement
Assembly
1
2
3
4
4
Insert dome
into the pump housing.
Ensure the smaller tab of dome is at top.
Press the entire dome firmly, including the
top portion.
Fasten with locking ring
Turn locking ring clockwise around the
parts until they engage.
Mount the nozzle
onto the end of the pump housing.
Bend the outer portion of the nozzle
inside out.
Insert into opening. Tab of nozzle faces
towards dome. Flip the outer portion of the
nozzle over the end of tube.
Insert valve inlet
into the bottom of the pump housing.
Wrap the flaps on the side of valve onto the
pair of pegs on the pump housing.
TIP: Lubricate parts with clean water to
ease fitting.
Advertisement
