Download Print this page

ring Steplight Manual

Smart lighting

Steplight

Smart Lighting

Table of Contents

Need help?

Do you have a question about the Steplight and is the answer not in the manual?

Page 1 Steplight Smart Lighting...
Page 2 The Bridge connects your Ring Smart Lights to the Ring app and the rest of your Ring devices. Download the Ring app. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. The app walks you through setting up and managing your Ring Steplight.
Page 3 Insert the batteries. Set up your Steplight in the Ring app. Using a flathead In the app, tap Set Up a Device. screwdriver, remove the screws from the back and When prompted, select Smart Lights and follow the lift off the battery lid.
Page 4 2. Install your Steplight. Drive the two mounting screws, leaving ~1/4” exposed. Attach the lid. Push the lid back onto your Steplight, and secure it with the screws you removed earlier. Mark the screw holes. Mount Steplight. Using the guide below, make a mark on the mounting Place your Steplight over surface below each arrow.
Page 5 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2019 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 01/04/19...