Radionics Security System 8112 User Manual page 20

Press the COMMAND bar to display FORCE
ARM before you reach the text for the last point.
4. One of the messages below may display in place of
FORCE ARM.
NOT BYPASSABLE
Indicates the system is programmed not to arm
with particular points faulted (doors or windows
open).
TOO MANY BYPASSD
Indicates that the system's number of allowable
bypassed points has been reached. Your system's
maximum number of bypassed and/or force armed
points is set by your security company. Check with
them to learn this number.
TOO MANY FAULTED
Indicates that more than the number of allowable
points are faulted. Bypassed points are counted as
faulted. Your system's maximum number of
bypassed and/or force armed points is set by your
security company. Check with them to learn this
number.
NOT AUTHORIZED
The authority level for your passcode does not
give you the authority to force arm.
5. Press ENT with FORCE ARM displayed to arm
your system with the faulted points removed from
service.