Features; Control Panel - Schumacher Electric DSR142 Owner's Manual

5.

FEATURES

7
6
5
4
3
2
1. 12V 3-pin socket for recharging
2. 12V DC port
3. USB ports
4. Battery clamps
5. 12V/USB button
6. Charging LED indicator
6.

CONTROL PANEL

DIGITAL DISPLAY
When the clamps are connected to a vehicle's battery, the digital display indicates the battery's voltage. When
not connected to a battery, the digital display is used to indicate the percent of charge of the jump starter's
internal battery. See Display Messages for a complete list of messages.
NOTE: If the vehicle's battery voltage is too low to detect, the display will remain blank; the voltage will not
display. A manual start procedure is required to enable the jump start function. See Section 8.2, Starting a
Battery with Low Voltage.
NOTE: During charging, the display will go into sleep mode and will not display any messages. To turn
the display back on, press any button.
LED INDICATOR
• Green LED solid: The internal battery is charging.
• Green LED flashing: Charging has aborted.
• Green LED pulsing: The internal battery is fully charged.
FUNCTION BUTTONS
12V/USB – Enables the 12V DC port and the USB ports
JUMP START – Enables the jump start function
8
1
9
10
11
7. Digital display
8. Jump Start button
9. 100~120V AC wall charger
10. 12V DC car charger
11. 12V port adaptor
• 7 •