Deleting A Song Step; Adding A Song Step; Storing A Song - Leprecon LM-850 Manual

Deleting a Song Step. The next Song mode page displays:
DELETE STEP 03
CONFIRM WITH GO
This page is used to delete a step from a song's scene list. Whenever this page is entered, the current
active Step in the song is displayed (Step 03 in the example); a different step can be selected with the
keypad or the UP/DOWN buttons. When the GO button is pressed, this step is deleted, and the song's End
Step is automatically decreased by one step to retain the same ending scene. The display then returns to
the first Song mode page.
Adding a Song Step. The fourth Song mode page shows:
ADD SCN 00 AT
STEP 12 GO=OK
This page is used to insert a step in the song. When this page is first entered, the defaulted step number to
be added (12 in the example) is always one greater than the End Step. In other words, any scene added to
the song will be added onto the end by the default. This setting can be changed with the keypad or
UP/DOWN buttons, as can the scene number to be added (which defaults to 00). When the GO button is
pressed, the new step is added, and the End Step is automatically increased by one to retain the same
ending scene. The display then returns to the first Song mode page.

STORING A SONG

When a song has been set up as desired, it must be stored in memory in order to be saved for further use.
This is done by pressing the STORE button, at which point the following display appears:
STORE CURRENT
SONG 34 AT 34
Where 34 is the currently selected song in this example. The destination song number can be changed with
the keypad or UP/DOWN buttons; pressing any other button (other than GO) will abort the Store command.
Pressing GO a second time will store the song to its new location; the operation is exactly similar to the
storing of scenes.