Page 2
Warnings This manual contains important information regarding the installation and operation of the BGR750 boarding gate reader. For safe and reliable operation of the imager, installers must ensure that they are familiar with, and fully understand, all instructions contained herein. Warranty Access Ltd warrants that this product shall be free from defects in workmanship and materials for a period of one year from the date of original purchase.
Page 3
Canadian Department of Communications RFI statement This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié...
1. Overview The BGR750 is a modern, flatbed Boarding Gate Reader for all barcoded boarding passes, designed specifically to allow intuitive use with all media types including the latest mobile devices and smartwatches. The device reads barcode tickets presented face-down over the scanning window. The large window, wide viewing angle, and depth-of-field creates a large barcode reading area, which makes positioning of the barcode easy.
2. Specifications Specification Details Dimensions (W x H x D) Angled screen: 143 x 87 x 259 mm Active scan window (W x D) 130 x 94 mm Weight 1100 g Environmental Operating temperature: 0ºC to 50ºC Storage temperature: 0ºC to 60ºC Humidity: 0–95% RH, non-condensing Body Robust PC/ABS enclosure with no moving parts...
Page 7
Specification Details Approvals • FCC 47CFR Part 15 Subpart B Class A • EN 55032:2015 Class A • EN 55024:2010 Safety • EN 60950-1 Radio (for RFID versions) • EN 301 489-1 V1.9.2: Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;...
3. Installation 3.1 Unpack the BGR750 Unpack the BGR750 and ensure that you have the following items: • Advisory notice card. • BGR750 device. • Serial and power cable. • USB and power cable. • Universal 12 V AC power supply. Report any missing items or damage immediately to your Sales Representative.
Page 10
If using a USB cable, connect the USB connector to a USB port on the computer. Figure 3: USB connection 4. Plug the power cable into the coaxial power connector on the Y-cable and then connect the Access-supplied power supply to an AC outlet. 5.
3.3 Mount the BGR750 The optional desk mount bracket provides a simple means to secure the device to a desktop or podium. The addition of the bracket prevents the hardware being accidentally knocked to the ground and damaged, potentially at a critical time in boarding. In addition, it is a deterrent against agents relocating hardware or theft.
3.4 NFC/RFID installation guidelines To optimise the performance of your Access-IS device DO NOT install it with its NFC/RFID antenna within 40 mm of a large metal or electrically-conductive component or structure. Important: Failure to observe this instruction may lead to the product’s NFC performance deteriorating or even failing completely.
4. Operation To read a barcoded boarding pass: • Place the document face-down into the barcode reader zone. As soon as a document is detected, the barcode reader’s LEDs will illuminate the document. Note: The BGR750 will automatically illuminate a barcode on a mobile device at a lower level than a barcode on a paper document.
5. Maintenance Limited maintenance of the BGR750 is required as the unit is free from moving parts. 5.1 Cleaning General, monthly cleaning of the imager window with a lint-free cloth is recommended to remove any dust and build up of debris. If the window is dirty, wipe the glass with a lint-free cloth moistened with isopropyl alcohol or use an alcohol wipe.