Unloading The Camera - AGFA Automatic 66 Instructions For Use Manual

Fig. 13
The back is now opened fully, the knurled knob of the take-up side gripped (see fig. 13)
and turned fully to the left.
spool a little, so that it can be easily taken out and removed as shown in the illustration.
The spool should be held firmly, secured with adhesive tape at once and placed in a
light-tight wrapping.
24
Slight oblique pressure on the upper spool flange lifts the

UNLOADING THE CAMERA

After the 12 exposure the transport
th
knob is turned repeatedly
resistance is felt.
opened – on no account in direct
sunlight – by unlocking
described on page 8 – but not fully.
A few further turns of the transport
knob will completely wind the end
of the backing paper still protruding
over the film channel.
until a
The back is
it as