Table of Contents
Advertisement
Safety Precautions
Before getting started, please read the following important safety precautions.
1.
The AIE100-903-FL-NX does not come with an operating system which must be loaded
first before installation of any software into the computer.
2.
Be sure to ground yourself to prevent static charge when installing any internal
components. Use a wrist grounding strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
3.
Disconnect the power cord from the AIE100-903-FL-NX prior to making any installation.
Be sure both the system and all external devices are turned OFF. Sudden surge of
power could ruin sensitive components. Make sure the AIE100-903-FL-NX is properly
grounded.
4.
Make sure the voltage of the power source is correct before connecting it to any power
outlet.
5.
Turn Off system power before cleaning. Clean the system using a cloth only. Do not
spray any liquid cleaner directly onto the screen.
6.
Do not leave equipment in an uncontrolled environment where the storage temperature
is below -40℃ or above 80℃ as it may damage the equipment.
Do not open the system's back cover. If opening the cover for maintenance is a must,
7.
only a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help discharge any static electricity
on human body.
When handling boards and components, wear a wrist grounding strap available from
most electronic component stores.
8.
Note!! Caution with touch! AIE100-903-FL-NX will be hot when it's on.
iii
Advertisement
Table of Contents
Need help?
Do you have a question about the AIE100-903-FL-NX and is the answer not in the manual?
Questions and answers