User Manual CONTENTS Ⅰ.Structure and functions------------------------------2 Ⅱ.Model ----------------------------------------------------2 Ⅲ.Main technical parameters--------------------------2 Ⅳ.Installation and debugging---------------------------2 Ⅴ.Operation and maintenance-------------------------3 Ⅵ.Attentions------------------------------------------------3 Ⅶ.Trouble treatment--------------------------------------5 Please read this Operation Manual carefully before operation and keep it properly.
Power Voltage Power Voltage tion Pressure pa L×W×H(mm) MJ/h Pipeline Natural gas 220/380 1280×2250×2400 1180 RO-16E 220/380 1280×2250×2400 1180 RO-16D RO-16G 220/380 2800 1000 2000 1280×2250×2400 1180 Ⅳ. Installation and debugging 1. Position for installation This equipment shall be installed to the place where there are no problems for the installation of auxiliary devices, operation of working procedure and fire fighting.
User Manual After the completion of power supply configuration, the equipment shall be checked comprehensively, like whether there is appearance abnormality, whether the control meters is under original condition, whether there are buttons breakdown. And then clean the machine completely. After the completion of this steps, adjust each device respectively.
User Manual 4. Principle of air speed selection ① As to roasting with mould, low air speed and longer roasting time shall be selected. ② As to deeper color or thin and small product roasting, high speed shall be selected. The temperature at the moment is high, so the roasting time shall be limited.
Page 6
User Manual 1). Damaged exhauster motor 1). Overhaul motor 2). Contactor trouble 2). Check the coil connection of or Non working air exhauster 3). Thermal relay jump the contactor, replacing or on the door top when the 4). Motor be blocked due to rarity repairing door is opened or time 5).
Page 7
User Manual 1). Lack of diesel or blocked oilway 1). Adding oil or clean oil line and 2). Air in the oilway filter 3). Blocked spray nozzle 2). Open exhaust valve, and start the 4). Damaged or blocked magnetic valve machine after completing...
Need help?
Do you have a question about the RO-16E and is the answer not in the manual?
Questions and answers