Van Beest Green Pin Tycan Lashing Chain User Manual

Green Pin Tycan
®
As strong as steel, a
fraction of the weight
safer
working
Material: Made with 100% Dyneema
webbing in a Mobius twist with stitching
on each side
Safety Factor: MBL equals 2 x Lashing Capacity
Temperature Range: -60°C (-76°F) up to +70°C (158°F)
Certification:
2.1 2.2 MTC
link lashing width thickness
size capacity link link
a b
mm t mm mm
15x25 10 25 15
13x30 13.6 30 13
link lashing width thickness
size capacity link link
a b
inch t inch inch
19 / x1 10 1 19 /
32 32
1 / x1 3 / 13.6 1 3 / 1 /
2 16 16 2
FCHLASH
Lashing Chain
improved
efficiency
® ; layers of
b
DNV-GL TQ CE
length links elongation weight
inside per mtr at MBL per mtr
c
mm % kg
100 10 5 0.58
125 8 5 0.75
length links elongation weight
inside per mtr at MBL per mtr
c
inch % lbs
4 10 5 1.28
4 23 / 8 5 1.65
32
Green Pin Tycan
man-made fibre, Dyneema
performance and flexibility of steel chain but is a fraction of the
weight. It is very safe to use, non-corrosive and waterproof. In
fact, it even floats! The soft touch and light weight makes Green
Pin Tycan easy to use, allows quicker application and greatly
®
reduces the potential of damage to cargo, a critical factor when
handling objects with sensitive surfaces. By using Green Pin
Tycan companies achieve greater efficiency and a safer working
®
environment for their staff.
Quality assurance
• Every chain length is tested at Lashing Capacity (LC).
• Visual inspection is carried out on each chain link to detect
possible defects.
• A 5-link sample of every 1000 meters (0.62 miles) produced is
tested to destruction to confirm the MBL.
• Green Pin Tycan
• Declaration of conformity to the Machinery Directive 2006/42/
EC with relevant CE marking.
Where and how can Green Pin Tycan
• Green Pin Tycan
chain that can be used within the limits as set forth in this user
manual.
• Green Pin Tycan
environmental temperatures, but should not be exposed to
temperatures above +70°C (158°F).
• Green Pin Tycan
up to the designated LC, but never exceeded.
• Green Pin Tycan
in a subsea environment.
• Green Pin Tycan
near-static conditions.
Verification before first use
Before first use of Green Pin Tycan
ensured 'that':
• Green Pin Tycan
specified in the order.
• The valid manufacturer certificate and CE declaration are
available for examination and/or verification.
• Ensure that manufacturer's label(s) are present and legible and that
layers
the label(s) contain the same information as the manufacturer's
certification.
• The users of the sling have received appropriate instruction and
training.
8
7
Verification before each use
• Check Green Pin Tycan
defects or missing ID tags prior to each use. Never use
layers
damaged Green Pin Tycan
• Connect Green Pin Tycan
components as mentioned further in this manual or to certified
components with a maximum surface roughness of 5 microns
8
7
and in adherence to below values.
link
size
mm
15x25
13x30
® has been created from the world's strongest
® , and is a link chain that has all the
® has a DNV GL Technical Qualification Certificate.
® Lashing Chain be used
® Lashing Chain is a general purpose lashing
® Lashing Chain can be used in min/max
® Lashing Chain is able to lash loads safely only
Lashing Chain can be used on land, at sea and
®
Lashing Chain should be used under static or
®
® Lashing Chain it should be
® Lashing Chain meets the exact requirements
Lashing Chain for any damage,
®
Lashing Chain.
®
Lashing Chain to recommended
®
minimum minimum
lashing capacity
pin diameter clevis width
t mm mm
10 16 26
13.6 20 31
maximum
clevis width
mm
31
37
greenpin.com