Table of Contents
Advertisement
G1G126-AB13-53
2. INTENDED USE
The device is exclusively designed as a built-in device for conveying
air and gases according to its technical data.
Any other usage above and beyond this does not conform with the
intended purpose and constitutes misuse of the device.
Customer equipment must be capable of withstanding the mechanical
and thermal stresses that can arise from this product. This applies for the
entire service life of the equipment in which this product is installed.
Intended use also includes
Using the device in DC grids only.
●
Conveying a gas/air mixture in gas burners with H gas, L gas and
●
liquid gas corresponding to gas family 2 and 3 in accordance with the
German DVGW (German Technical and Scientific Association for
Gas and Water) worksheet 260, in a concentration of approx. 90%
air and 10% gas, integrated in a system which is designed
specifically for operation with this gas type.
conveying air at an ambient air pressure between 750 mbar and 1050
●
mbar.
Following the operating instructions.
●
Using the device within the permitted ambient temperature range; see
●
Chapter 3.5 Transport and storage conditions and
Chapter 3.2 Nominal data.
Using the device only in stationary systems.
●
Installing the device in an integrated system for conveying air/gas
●
mixtures.
Commissioning the built-in component only after installation in the
●
customer equipment.
Operating the device with all protective devices.
●
Improper use
In particular, operating the device in the following ways is prohibited and
could be hazardous:
Operating the device in an unbalanced state, e.g. due to dirt deposits
●
or ice formation.
Resonant operation, operation with severe vibration. This also
●
includes vibration transmitted to the fan from the customer installation.
Conveying a medium that contains abrasive particles.
●
Conveying a highly corrosive medium.
●
Conveying a medium with high dust content, e.g. suctioning off
●
sawdust.
Operating the gas blower in an environment that contains flammable
●
gases or dust or combustible solids or fluids.
Conveying air/gas mixtures outside of an integrated system
●
satisfying the requirements described above.
Using the blower as a safety component or to perform safety-related
●
functions.
Operation in medical equipment with a life-sustaining or life-support
●
function.
Contact with materials that could damage blower parts, e.g. liquids
●
during cleaning.
Operation with completely or partially disassembled or manipulated
●
protective devices.
Exposure to radiation which could damage blower parts, e.g. strong
●
UV radiation.
Operation with external vibrations.
●
Operating the device in an explosive atmosphere.
●
Item no. 53368-5-9970 · ENU · Change 202174 · Approved 2018-12-27 · Page 3 / 10
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions
Operation with completely or partially disassembled or manipulated
●
protective devices.
In addition, all applications not listed among the intended uses.
●
Operation in medical equipment with a life-sustaining or life-support
●
function.
Conveying solids in the flow medium.
●
Painting the device
●
Connections (e.g. screws) coming loose during operation.
●
Advertisement
Table of Contents
