Dvd Audio Disc Playback Mode; Setting The Speaker Mode - Samsung HT-HDP40 Instruction Manual

DVD Audio Disc Playback Mode

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
Press the MENU
1
button while the
disc tray is open.
Press Cursor
3
button to move to
'DVD TYPE' and then
press ENTER button.
Note
•
DVD Play mode is set to DVD Audio
as factory default setting.
DivX (R) registration
51
Press Cursor
2
button to move to
'Setup' and then
press ENTER button.
Press Cursor ,
4
button to move to
'DVD VIDEO' and then
press ENTER button.
•
Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
•
DVD VIDEO : set to play the DVD video
contents contained on a
DVD audio disc.
•
DVD AUDIO : set to play the default
DVD audio.
•
Please use the Registration code to register this player
with the DivX (R) video on demand format. To learn more,
go to www.divx.com/vod.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
Press Cursor
In Stop mode,
1 2
button to move to
press MENU
'Audio' and then
button.
press ENTER button.
Press Cursor
In the Speaker
3 4 , buttons to move
Setup, press the
to the desired
speaker and then
ENTER button again.
press ENTER button.
•
For C, SL, and SR, each time the button
is pressed, the mode switches
alternately as follows: SMALL
•
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
Note
•
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 61).
ENG
, ,
NONE.
52